Market Forge, Sterilmatic Sterilizer, Refurbished

The compact sterilizer that does a big sterilizer job. This little sterilizer
has as much inside capacity as many large, more costly conventional sterilizers
and up to five times the capacity of smaller tabletop units.
A compact steam autoclave for bench or stand mounting. Single,
automatic sterilizing cycle eliminates human error. Sterilmatic
reaches sterilizing temperature in 8 to 10 minutes from a cold start
and in 3 to 7 minutes when in continual use. Sterilizing cycle begins
when unit reaches temperature and pressure. Signal light remains lit
until cycle ends. Unit shuts off and exhausts steam automatically with
a choice of fast 1-minute exhaust for instruments and glassware or
slow 10 minutes exhaust for liquids.
Steril-matic features a self-sealing, self-aligning, one-piece
internal door, which cannot be opened until steam pressure is
completely exhausted. The inner chamber is fabricated from 4.8 mm
thick welded aluminum with inside dimensions of 40.6 cm diameter and
66 cm length. Exterior cabinet is constructed of polished stainless
steel and fitted with 4 adjustable (10 to 168 cm) legs.
Controls are located at eye level. Equipped with automatic
temperature control, with temperature range of 82° - 149°C, safety
valve, 0-30lb. Steam gauge, 0-60 minute timer, low water cut-off,
thermostatic steam trap, signal light, flat perforated steam baffle
and removable pan supports. Electrical – 230V, 1 phase, 3-wire, 60
Hz
Specifications:
- Out side dimensions:
- 18 3/4" wide, 31" deep, & 27 5/8" high
- (476mm wide, 787mm deep, 702mm high)
- Chamber dimensions:
- 16" dia & 26" deep
- (406mm & 660mm)
- Trays:
- 2 Tray capacity:
- 12" x 20" x 4"
- (305mm x 508mm x 102mm)
- Electrical requirements:
- Unit is rated at 12KW at 236 volts & equipped for operation at:
- 208-240 VAC, 3 wire, 1 Phase, 60 Hz
- 208-240 VAC, 4 wire, 3 Phase, 60 Hz
- 220 VAC, 1 Phase, 50 Hz
- 220 VAC, 3 Phase, 50 Hz
- Standard Equipment will include:
- Automatic temperature control
- Thermometer
- Safety Valve
- Steam gauge
- 0-60 minute timer
- Operating Specs:
- Operating pressure is 0-15 psi
- Normal operating temp is 250 degrees f (121.1 c)
- Adjustable unit is 230-250 degrees
|