Scientific Equipment Source
1895 Clements Rd., Unit 127
Pickering, ON, L1W 3V5
Canada
Tel: 905-231-0930
Fax: 905-231-0293
|
Hewlett Packard (Agilent) HP 3395 integrator, Refurbished
HP 3395 integrator is a low-cost, general-purpose data system that will work
with a liquid or gas chromatograph from virtually any manufacturer.
For about the same cost as a strip chart recorder, the HP 3395
includes features normally found only on more expensive integrators.
Plus, its one-piece keyboard—with simple, easy-to-use
keys—withstands continual use.
- Assures reliable analyses. Plots baselines and calibration
curves that provide a visual representation of detector response for
easy-to-verify results.
- Manages post-run execution of programs. Autoscheduler
increases productivity. Automatically draws baselines during
replotting.
- Automates data analysis and reporting. Via batch
reprocessing function.
- Delivers excellent plot quality and printing. Prints inkjet
output on plain paper for permanent results. Automatic START/STOP
function prevents paper waste.
- Produces annotated reports. Generates reports complete with
amounts, retention times, calculation type (peak area or height),
integration parameters, and time and date
.
- Stores and protects data. Standard RAM of 128K saves up to
21/2 hours of data and methods. File system aids in reanalyzing files.
Plus, 100% memory backup preserves methods and data when the
integrator is turned off, or after a power failure.
- Performs multilevel calibrations. Up to 63 levels.
- Includes RS-232-C communications port. For communicating
with host computer.
Analog/Digital Conversion
|
Continuously integrating dual slope, 100% area conversion
|
Sampling Rate
|
20 readings/second
|
Maximum Retention Time
|
6900 minutes
|
Rentention Time Resolution
|
0.001 minute (0.06 second)
|
Maximum Storage Capacity
|
~1240 peaks
|
Detectable Peak Width Range
|
~0.3 second to 10 minutes at half-height
|
RAM
|
128K
|
Methods
|
Area %, Height %, Normalization, Ext. Std., Ext. Std. %, Int. Std., Int. Std. %
|
Calibration Curve Methods
|
Single-point, point-to-point, linear regression (least squares), nonlinear
(quadratic)
|
Dynamic Range
|
106
|
Input Range
|
-10 to +1000mV
|
Nonlinearity
|
0.2% maximum
|
Data Communications
|
RS-232-C
|
Post-run Autoscheduling
|
Up to 20 programs
|
Batch Reprocessing
|
Up to 1000 files
|
Printer/Plotter
|
Chart speeds, up to 30cm/min; bidirectional
|
Safety Classification
|
IEC Safety Class I
|
RFI Certification
|
FTZ 1046/1984 (VDE Level B)
|
Dimensions(without paper)
|
1411/16L x 1313/16W x 47/8 in.H (37 x 35 x 12cm)
|
Net Weight
|
91/2 lb. (4.3kg)
|
Electrical Requirements
|
115/230V 50/60Hz, 50VA
|
|
|
