Hood, Ductless Fume, Air Science USA, Purair 10XL, 34W x 27D x 47H inches

The Purair range of ductless fume hoods have been designed to provide operator protection when using hazardous substances. A face velocity at 100 fpm ensures containment of fumes and an alarm will alert the operator when the airflow falls to an unacceptable level. All mechanisms in the head section of the Purair are on the clean side of the filter, thus preventing contamination. Switches and electrical components are totally isolated from the dirty airflow and away from any contamination. The work area has a removable spillage tray which can be easily cleaned. Optional integral lighting is available. 

FILTER SELECTION 

The main filter can be chosen from 14 different types of carbon, which include specialty media for vapors of organics, solvents, acids, mercury and formaldehyde. HEPA filters for particulate filtration are also available to suit your application needs. In addition, the Purair can be equipped with a secondary back-up filter for added protection. This filter is required by US standard ANSI Z9.5 section 4.12 4.2. 

PURAIR 10XL TYPICAL APPLICATIONS

Typical applications include weighing, chemical sampling, histology, forensic and pharmaceutical. 

EFFICIENT AND ECONOMICAL 

These units are energy saving. Clean air is recirculated into the laboratory, therefore, they do not exhaust expensive conditioned and/or heated air into the atmosphereent of hazardous substances thus protecting both the environment and the operatoerally surpass legal requirements. 

Supply 110v 60Hz single phase (other voltages available on request) Switches Mains on/off Monitoring Low Airflow All UNITS Spillage Tray Polypropylene (optional) Fan Centrifugal 

OPTIONS

Color Back panel - Clear Color Side panel - Clear 

ELECTRICAL

• Internal lights/Safety exhaust filter/Electronic filter
• saturation alarm/Spillage tray
• Airflow (CFM) - 145
• Face Velocity (FPM) – 100
• Lighting - 2 x 15watts
• Noise (1m from unit) - <50dBA
• Width/Depth/Height (inch) 34 x 27.5 x 47.5
• W x D x H (mm) - 868 x 700 x 1210
• Weight main filter 1 x 22lbs
• Weight safety filter 1 x 11lbs
• Construction - Epoxy coated mild
• steel frame & head unit
• Color - White
• Color Back panel - Clear
• Color Side panel - Clear
• Spillage Tray Polypropylene (optional)
• Fan Centrifugal
• Supply 110v 60Hz single phase
• (other voltages available on request)
• Switches Mains on/off
• Monitoring Low Airflow
• Internal lights/Safety exhaust filter/Electronic filter
• saturation alarm/Spillage tray