Ductless Fume, Streamline Laboratory Products, Model SDC-3AX,
40.7W x 25.2D x 50.0H inches

• external dimensions 40.7W x 25.2D x 50H inches

• internal work zone 37.5W x 24.0D x 28.1H inches

• air volume 344 cmh / 202 cfm

• inflow velocity Initial setpoint: average of 0.5 m/s or 100 fpm measured in plane of work aperture

• Noise Level 61 dBA at initial blower speed setting measured at typical operator work position

• Light Intensity >800 lux / >75 foot candles at work surface level

• Construction Enclosure frame: Mild steel hollow sections with whiteoven-baked epoxy powder-coated finish Blower and filter module: Electro-galvanised steel with whiteoven-baked epoxy powder-coated finish Back panel: Electro-galvanised steel with white oven-baked epoxy powder-coated finish
  Front and sides: 5mm / 0.2” transparent perspex

• Power Rating 225W (230VAC units), 270W (115VAC units)

• Max Shipping Weight 192 kg / 427 lbs

Today, the Streamline® Laboratory Products’ Ductless Fume Cabinet is probably the most advanced in the world, from a design and engineering point of view, of any low-cost ductless fume cabinet. Now users can enjoy, at an economical cost, the benefits of features previously found only on high-end ductless fume cabinets- including sophisticated electronic airflow alarms, a unique filter mounting system that eliminates bypass leaks inherent in conventional clamping systems, a generouslysized main filter with higher chemical retention capacities.

Unlike similar products offered by the competition, our blower system is also oversized to deliver higher airflow volumes, at lower operating points. With the blower system running at less than maximum capacity, longer operating lifetimes and lower noise levels are achieved. The motorised impeller design of our blower system also ensures better airflow uniformity and distribution within the cabinet for better operator protection. Another key advantage of these models is their low energy consumption, due to Streamline’s employment of exclusive external rotor technologies.

• Unique modular design eliminates the need for local assembly while reducing shipping costs; convenient maintenance features include a filter design which allows replacement in minutes and quick-snap wire connectors for easy setup
• Industrial-grade main body constructed of electrogalvanised steel: with an abrasion-resistant white oven-baked powder-coated finish
• All components designed for maximum chemical resistance for long service life and durability
• 10-degree sloped front and large 200mm / 7.9” access opening allows easy access to work zone - enhancing ergonomics, eliminating operator fatigue and increasing productivity
• Permanently lubricated direct drive centrifugal blower(s); energy efficient external rotor motor type design reduces operating costs; extremely low noise and vibration levels (less than 53dBA at working position) due to proprietary construction and mounting technology
• Built-in solid state variable speed controller(s) (infinitely adjustable from zero to the maximum setting) with built-in RFI and noise filters is superior to conventional “step” controllers
• Standard cabinet control system consists of separate switches / indicator lights for blower, lights; built-in electronic audible / visual alarms for airflow and front window position deliver enhanced operator safety
• Integral fluorescent lighting is mounted out of the air stream for better airflow uniformity; in addition, the aerodynamic design of the enclosure ensures maximum containment possible
• High-quality prefilter (replaceable from within work zone) and activated carbon filter (7 different filter types available depending on the requirements of your application)
• Air exhaust slots at the backwall of the workzone for enhanced operator safety
• Transparent perspex front window and sides provide a high degree of visibility and operator comfort; front window is mounted on selfsupporting pre-tensioned hinges, allowing for easy access during cabinet loading and startup
• Built-in passthrough flaps (2ft model - 1 flap; 3ft and 4ft models - 2 flaps) at back of work zone for electrical, gas, nitrogen, vacuum etc. services
• Designed to meet the general safety requirements of the IEC 61010-1 / EN 61010-1 / UL 3101-1 / CSA C22.2 No. 1010.1-92
• Cabinet is shipped fully-assembled; simply plug the unit into a power source for operation - no local installation is required; unit is supplied with a 3-pin plug; 10 plug types are available (specify order code when ordering)